The Eucafloor laminate flooring is developed with specific technology and, therefore, offers consumers a lot of advantages. It is composed of different layers, each of which has a determined function.:
The upper layer of the Eucafloor laminate flooring is composed of a crystalline cellulose film filled with aluminum oxide particles impregnated with melamine resin. Responsible for its high resistance to scratches and abrasion, its low porosity avoids the absorption of liquids, facilitates cleaning the Eucafloor and also increases its life cycle.
Decorative high gram decorative paper impregnated with melamine resin which determines the pattern of the floor, providing the product with beauty.
Medium density panel produced with lengthened needled eucalyptus shaped particles, It grants the product greater dimensional stability, greater resistance in the gluing area, a lower dilation coefficient, high resistance to impact and concentrated loads, besides greater resistance to absorbing liquids. The HPP is produced with Wood coming from forests certified by FSC®
and other controlled sources.
Layer constituted of high gram kraft paper impregnated with melamine resin, which ensure the dimensional stability of the Eucafloor laminate flooring, besides protecting it from the moisture humidity coming from the subfloor.
- Planks 1,357 mm long, 250 mm wide and 8 mm thick.
- Boxes with 7 rods, 7 planks in wood grained patterns (2.374 m²).
Materials required - Eucafloor expanded polyethylene mantle(2 mm) .
Metallic square, metallic lever (bar), manual miter saw, board adjuster, rubber hammer, spacers, prick, screwdriver, universal pliers, hammer, bevel (mobile square), safety goggles, rasp, chisel, spatula, tape measure, spirit level, stiletto, manual saw, traction belt and fixed saw frame.
Miter box saw, shaper, grinding machine, fret saw, circular saw and extension cord.
Download the Installation Manual now
Cleaning and preservation of the Eucafloor laminate flooring
To clean the Eucafloor laminate flooring a vacuum cleaner, without scraping the floor, a broom with soft bristles, or a cloth soaked in solutions of household cleaning products, free of wax or silicone, should be used.
Use protective felt underneath furniture, chair and table legs;
Use mats at entrance doors to collect the dirt and possible particles of stone and sand retained on shoe soles;
It is advisable to use chairs with polyurethane casters. The use of any other type of caster may scratch or damage the Eucafloor laminate flooring, altering its physical features;
The Eucafloor laminate flooring must not be exposed to water. If any liquid is spilled, dry it as quickly as possible to avoid infiltration.
Never use any type of abrasive material when cleaning the Eucafloor laminate flooring (soap, abrasive or steel sponge). These products produce irreversible scratches on the floor surface;
Do not use waxes, as they cause a fatty film to form on the surface of the Eucafloor laminate flooring, which makes it difficult to clean and causes stains to appear;
Never expose the Eucafloor laminate flooring to excessive quantities of water or any other liquid, or let them remain on the Eucafloor laminate flooring.