Eucatex



The colors and patterns on this site are only for reference, there may be divergence between the colors on the screen and the real colors of products. Availability on request.

Savings and quality for painting inside surfaces

Eucalar Acrylic Latex is a paint with a matte finish, recommended for painting inside of stucco, concrete, wood, fiber cement, acrylic paste, acrylic textured coatings, acoustic linings and inside surfaces of spackle and drywall.

Matte finish

Composition

Aqueous dispersion based resin of vinyl polymer, pigments free of heavy metals, inert mineral charges, aliphatic hydrocarbons, glycols and ethoxylated and carboxylated tensoactives.
This product is classified in accordance with the standard NBR 11.702 from the ABNT - Associação Brasileira de Normas Técnicas (Brazilian Technical Standards Association) Type 4.5.3.

  with water m2/coat  
Brick/Mortar First coat:
20% to 30%
Other coats: 20%
40 to 50
200 to 250
Gallon (3.6 liters)
Can (18 liters)

 
Two to three with
4 hour interval

To the touch: 2 hours
Final: 12 hours


Application
Foam roller Finishing Brush Finishing Brush Spray Gun

  • To obtain a fine finish over Spackle or Acrylic, we recommend using a low nap wool paint roller, the same used for application of epoxy paint;  
  • In painting or repainting where there are applications or retouching of Pastes (Spackle, Acrylic or Plaster), differences in sheen may be noted after finishing application. This is due to the lack of uniformity in absorption from the substrate. To avoid this effect, we recommend application of the paint itself diluted 30% with only at the points that had corrections with paste. Generally, two coats are enough to achieve the desired coverage but depending on the state and color of the surface, more coats may be necessary.
  • Up to two weeks after painting, contact with water at isolated points may cause stains.  If this occurs, immediately wash the entire surface with water.

According to standard ABNT NBR 13.245.

  • Preparation: the surface must be firm, uniform, clean, dry, and without dust, fatty materials, soap and mold.  Before beginning painting, observe the following instructions:
  • Surfaces with loose or falling parts: they must be scraped or brushed until complete removal of paint residues. Then apply Eucatex Wall Base Preparer (Fundo Preparador de Paredes) according to label instructions.
  • Surfaces with mold: wash them with a water and bleach solution in a 1:1 ratio, rinse and wait for them to dry. This process is necessary to correct possible causes of mold generation.
  • Surfaces with fatty stains: wash them with a water and neutral detergent solution, rinse and wait for them to dry.
  • New stucco: wait for it to cure for at least 30 days. Apply 1 or 2 coats of Eucatex Acrylic Sealer (Selador Acrílico) according to label recommendations and if it is necessary, smooth out the surface by applying 2 or 3 coats of Eucatex Acrylic Paste (Massa Acrílica) (areas that may receive moisture) or Eucatex Spackle (Massa Corrida) (areas that may not receive moisture).
  • Light stucco (low cohesiveness): apply Eucatex Wall Base Preparer (Fundo Preparador de Paredes) according to label instructions and smooth the surface, applying 2 or 3 coats of Eucatex Acrylic Paste (Massa Acrílica) (areas that may receive moisture) or Eucatex Spackle (Massa Corrida) (areas that may not receive moisture).