The immediate contact with the floor after the application of the product may damage the paint. That is why it is necessary to wait for the recommended drying time.
It is not advisable to apply it in places exposed to high temperature, heavy traffic and manufacturing ambiences.
The floor should only be washed 15 days after applying the product, to ensure its total resistance.
For painting on fired cemented floors, apply beforehand a coat of Bicomponent Phosphate Primer or Epoxy Base Promoter Adhesion Primer (as per the manufacturer’s instructions), to hold the finishing paint better.
According to standard ABNT NBR 13.245.
Weak plaster (low cohesion):
Preparation: the surface must be firm, cohesive, clean, dry, without dust, fatty materials, soap and mould. Before starting the painting, note the guidelines to follow:
Surfaces with loose flakes or coated in lime (whitewash) : they must be scraped or brushed until the complete removal of the paint residue. Then apply the Eucatex Wall-Preparing Primer, as indicated on the packaging.
Mould surfaces: wash them with a solution of water mixed with sanitary water in the proportion of 1:1, rinse them and wait for them to dry. This process is necessary to correct the possible causes of the mould being generated.
Surfaces with fatty stains: wash them with a solution of water and neutral detergent, rinse them and wait for them to dry.
New plaster: wait for the cure for at least 30 days. Apply 1 or 2 coats of Eucatex Acrylic Sealer, as per the recommendation of the packaging, and if necessary level the surface, applying 2 or 3 coats of Eucatex Acrylic Putty (wet areas) or Eucatex Putty (areas not wet).
apply Eucatex Wall-Preparing Undercoat as recommended on the packaging and level the surface, applying 2 or 3 coats of Eucatex Acrylic Putty (wet areas) or Eucatex Putty (areas not wet).