The colors and patterns on this site are only for reference, there may be divergence between the colors on the screen and the real colors of products. Availability on request.

30% More yield without losing coverage and resistance

The Eucatex Extra Yield Acrylic is a high performance paint, indicated for people greater performance in the application, in both external and internal areas, adhering to different masonry surfaces.

It has greater consistency and allows more dilution than conventional products, with 30% greater yield, always without losing coverage and resistance. It is an acrylic paint with extremely little splashing and easy to apply, with high coverage power and resistance to mould. It has an exclusive collection of colors in the matt finishing, besides Slght Scent, an attribute highly regarded currently. Indicated for maximum protection and embellishing of plaster, acrylic putty and putty, repainting, textures, concrete, fiber cement and gypsum surfaces.

Matt finishing



Resin with a base of aqueous dispersion of acrylic styrene copolymer, pigments free of heavy metals, inert mineral loads, glycols and tensoactives.
This product is classified according to  standard NBR 11.702 of the ABNT (Brazilian Technical Standards Association) Type 4.5.2
  com água m2/demão  
Masonry 80% in all the
60 to 100
300 to 500
Gallon (3.6 liters)
Can (18 liters)
Coats:Two to three with an
interval of 4 hours
Drying Period: To touch: 2 hours
Final: 12 hours
Wool roller Paintbrush Flat Paintbrush

According to standard ABNT NBR 13.245.

  • Preparation: the surface must be firm, cohesive, clean, dry, without dust, fatty materials, soap and mould. Before starting the painting, note the guidelines to follow:
  • Surfaces with loose flakes or whitewashed (lime ) they must be scraped off or brushed off until the complete removal of the paint residue. Then apply the Eucatex Wall-Preparing Undercoat, as indicated on the packaging;
  • Mould surfaces: wash them with a solution of water mixed with sanitary water in the proportion of 1:1, rinse them and wait for them to dry. This process is necessary to correct the possible causes of the mould being generated;
  • Surfaces with fatty stains: wash them with a solution of water and neutral detergent, rinse them and wait for them to dry.
  • New plaster: wait for the cure for at least 30 days. Apply 1 or 2 coats of Eucatex Acrylic Sealer, as per the recommendation of the packaging, and if necessary level the surface, applying 2 or 3 coats of Eucatex Acrylic Putty (wet areas) or Eucatex Putty (areas not wet);
  • Weak plaster (low cohesion): apply Eucatex Wall-Preparing Undercoat as recommended on the packaging and level the surface, applying 2 or 3 coats of Eucatex Acrylic Putty (wet areas) or Eucatex Putty (areas not wet).