• Eucatex Smooth Acrylic Texture

The colors and patterns on this site are only for reference, there may be divergence between the colors on the screen and the real colors of products. Availability on request.

Ideal for coating internal and external masonry.

Easy to apply, the Eucatex Smooth Acrylic Texture can be used by paint professionals and consumers, following the techniques recommended by the manufacturer.

Versatile, its features allow different finishings to be obtained according to the means of application.

The Eucatex Smooth Acrylic Texture is ideal for coating internallyl (rooms, halls, corridors, etc.) and externally (which is painted) masonry. The application can be complemented with Eucatex Aging Gel or two coats of Eucatex Premium Acrylic.


Resin with a base of aqueous dispersion of acrylic styrene copolymer, pigments absent of heavy metals, inert mineral loads, aliphatic hydrocarbons, glycols and ethoxyl and carboxylic tensoactives.
This product is classified according to standard NBR 11.702 of November 1991 of the ABNT (Brazilian Technical Standards Association) Type 4.6.1
  with water m2/coat  

Plaster, concrete,
spackle, fiber cement, acrylic paste and cement blocks
Ready for use
(if necessary, dilute with up to 5% of water)
6 to 10
15 to 25
Can (12 liters)
Can (16 liters)
One coat Drying Period: To touch: 4 hours
Final: 18 hours
Total cure: 7 days
Rigid foam roller Rubber roller Steel straightener

According tp  standard ABNT NBR 13.245.

The good performance of the product basically depends upon preparing the surface, besides factors as dilution, homogenization, application, temperature, drying time, etc. The surface must be firm, cohesive, clean, dry, without dust, fat or mould. Check out the different types of surface and the appropriate manner of preparing them:
Surface Type Treatment
Stains of fat or grease Wash with a solution of water and neutral detergent, rinse and wait for it to dry.
Mould areas Wash with a solution of water and sanitary water in equal parts, wait 6 hours, rinse and wait for it to dry.
Cement blocks Before starting to apply the product, level the spaces formed by the joints with mortar and apply a coat of Water-Based Wall-Preparing Primer.
New plaster Wait for the cure and drying for at least 30 days and apply Eucatex Pigmented Acrylic Sealer.
Weak plaster,
disaggregated, coated in lime,
with parts loose or  walls with old paint in a bad state
Remove the loose parts, sand and brush, eliminate the dust and apply a coat of Water-Based Wall-Preparing Primer.