Eucatex



The colors and patterns on this site are only for reference, there may be divergence between the colors on the screen and the real colors of products. Availability on request.

Rustic finishing for external and internal surfaces

Easy to apply and with a granulated formulation, it comes ready for use. It can be used with other Eucatex solutions to enhance interiors.

It is ideal to texturize external and internal surfaces of plaster, concrete, fiber cement, gypsum and surfaces already painted. It is hydrorepellent and maintains the painted surfaces looking beautiful for longer.
 

Composition

The product is developed from resin with a base of aqueous dispersion of acrylic styrene copolymer, pigments free of heavy metals, inert mineral loads, glycols, tensoactives, and microbicide agent additives.
It is classified according to  standard NBR 11.702 of the ABNT (Brazilian Technical Standards Association) Type 4.6.3.
 
  with water m2/coat  
 
Plaster, concrete,
spackle, fiber cement, acrylic paste and cement blocks
 
Ready for use
(if necessary, dilute with up to 5% of water)

7 to 11

Can (14 liters)
 
 
One coat Drying Period:To touch: 4 hours
Final: 18 hours
Total cure: 7 days
 
Application
Steel straightener Plastic straightener

As per standard ABNT NBR 13.245

The good performance of the product basically depends upon preparing the surface, besides factors as dilution, homogenization, application, temperature, drying time, etc. The surface must be firm, cohesive, clean, dry, without dust, fat or mould. Check out the different types of surface and the appropriate manner of preparing them:
 
Surface Type Treatment
SURFACES WITH RELEASED OR CAUSED PARTS They should be scraped or brushed until complete removal and then apply Eucatex Fundo Prep. Wallpapers.
MOLDED SURFACES Wash with Eucatex Zero Mofo as indicated and wait for drying.
SURFACES WITH FATTY STAINS Rinse with water and neutral detergent solution, rinse and allow to dry.
NEW REBOCO You should wait for a cure for at least 30 days. Apply Eucatex Premium Acrylic Sealer, if necessary, level the surface applying Eucatex Acrylic Mass (external areas) or Eucatex Mass Corridor (internal areas).
FROZEN SLOW (LOW COHESION) Apply Eucatex Premium Wall Preparation Primer as recommended by the packaging and if necessary level the surface by applying Eucatex Acrylic Mass (external areas) or Eucatex Mass Corridor (internal areas).