The colors and patterns on this site are only for reference, there may be divergence between the colors on the screen and the real colors of products. Availability on request.

With a siliconated formulation,it facilitates cleaning

Eucatex Eucalux Premium Enamel is indicated for application of wood and metal surfaces, with features of high resistance to bad weather. With excellent drying and superb finishing, it has a siliconated formulation, which makes it more difficult for dirt to adhere and easy cleaning.


Gloss, satin and matt (general use)


Alkyd resin with a base of semi-drying vegetable oil, organic and inorganic pigments, inert mineral loads, aliphatic hydrocarbons, organometallic dryers. It does not contain benzene.
These products are classified according to standard NBR 11.702 of November 1991 of the ABNT (Brazilian Technical Standards Association) Gloss Type 4.2.1 and Type 4.2.3.

  with turpentine m2/coat  
New woods
Other surfaces
First coat: 20% to 30%
Others: 20%
40 to 50
10 to 12
2.5 to 3
35 to 45
9 to 11

Gallon (3.6 liters)
1/4 of gallon (900 ml)
1/16 of gallon
(225 ml)
Gallon (3.2 liters)
1/4 of gallon (800 ml)

Two to three coats with an
interval of 12 hours

Dilute with 30% of turpentine,
pressure between 2.2 and 2.8 kgf/cm2
or 30 and 35 lbs/in.2

Drying Time: To touch: 2 to 4 hours
Final: 24 hours


Foam roller


Flat paintbrush

Spray gun

According to ABNT NBR 13.245.

  • To obtain a fine finishing and ensure a perfect adherence, it is of paramount importance to execute the sanding before starting the painting and between coats. It is also important to observe the interval between coats in order to obtain the best result possible;
  • When diluting the paint, always use Eucatex Turpentine to maintain the features of   product. Never use Thinner, gasoline, benzene or other solvents;
  • Concerning the gloss, the satin and Matt finishing can have different resistance to bad weather, when compared with the gloss finish;
  • Before starting the painting, it is important to homogenize the product appropriately with the aid of an appropriate rectangular tool;
  • After using any paint remover, check that the surface has no residue of the remover used, before applying the Eucatex Premium Synthetic Enamel. This removal must be executed using a cloth soaked in Eucatex Thinner.

Según recomendaciones de la Norma NBR 13.245 de la ABNT.

  • Para obtener un óptimo acabado y ofrecer una perfecta adherencia, es fundamental hacer el lijado antes de iniciar la pintura y entre las manos de aplicación. También es importante observar el intervalo entre las manos para obtener el mejor resultado posible;
  • Al diluir la tinta, use siempre Eucatex Aguarrás para conservar las características del producto. Evite de usar thinner, gasolina, bencina u otros solventes;
  • Cuanto al brillo, las opciones de acabado satinado y opaco pueden presentar alguna diferencia de resistencia a los agentes atmosféricos cuando son comparadas al acabado brillante;
  • Antes de iniciar la pintura, se recomienda hacer el homogenizado apropiado del producto haciendo uso de una herramienta adecuada;
  • Después de usar cualquier removedor de tinta, verificar si la superficie no contiene residuos del removedor usado, antes de hacer la aplicación del Eucatex Esmalte Sintético Premium. Esa remoción debe ser hecha con un paño humedecido con Eucatex Thinner.