Eucatex



The colors and patterns on this site are only for reference, there may be divergence between the colors on the screen and the real colors of products. Availability on request.

Low priced and it has excellent quality and coverage.

Peg & Pinte Acrylic Paint is a matte finishing paint with low cost and good quality, recommended for painting inside surfaces of stucco, acrylic paste, textured material, concrete, fiber cement, spackle, drywall, repainting over PVA and acrylic. It is easily applied, with good coverage and yield.
 

Composition

Aqueous dispersion based resin of vinyl acrylic polymers, pigments free of heavy metals, inert mineral charges, glycols and ethoxylated and carboxylated tensoactives.
This product is classified in accordance with the standard NBR 11.702 from the ABNT - Associação Brasileira de Normas Técnicas (Brazilian Technical Standards Association) Type 4.5.3.
 
  with water m2/coat  
Spackle or acrylic paste, repainting, stucco, concrete blocks, drywall, fiber cement or concrete 20% in all coats 50 to 60
250 to 300
Gallon (3.6 liters)
Can (18 liters)
 
 
Two to three with a
4 hour interval
To the touch: 2 hours
Final: 12 hours
 
Application
Wool roller Finishing Brush Paint Brush Spray Gun

A) To obtain a fine finish over spackle or acrylic paste, we recommend using a low nap wool paint roller, the same used for application of epoxy paint;

B) In painting or repainting where there are applications or retouching of pastes (spackle, acrylic or plaster), differences in sheen may be noted after application. This is due to the lack of uniformity in absorption from the substrate. To avoid this effect, we recommend application of the product diluted with 30% water only at the points that had corrections with paste;

C) Removal of grime: in the affected location, use a soft cloth or sponge with neutral detergent. Then clean with a moist cloth. Perform cleaning with soft movements only in the affected location so as to preserve the original finish. In the case of deeper grime, this process may lead to polishing of the paint film (difference in sheen), not affecting resistance and durability;
 

According to standard ABNT NBR 13.245.

  • Preparation: the surface must be firm, uniform, clean, dry, and without dust, fatty materials, soap and mold.  Before beginning painting, observe the following instructions:
  • Surfaces with loose or falling parts: they must be scraped or brushed until complete removal of paint residues. Then apply Eucatex Wall Base Preparer (Fundo Preparador de Paredes) according to label instructions.
  • Surfaces with mold: wash them with a water and bleach solution in a 1:1 ratio, rinse and wait for them to dry. This process is necessary to correct possible causes of mold generation.
  • Surfaces with fatty stains: wash them with a water and neutral detergent solution, rinse and wait for them to dry.
  • New stucco: wait for it to cure for at least 30 days. Apply 1 or 2 coats of Eucatex Acrylic Sealer (Selador Acrílico) according to label recommendations and if it is necessary, smooth out the surface by applying 2 or 3 coats of Eucatex Acrylic Paste (Massa Acrílica) (areas that may receive moisture) or Eucatex Spackle (Massa Corrida) (areas that may not receive moisture).
  • Light stucco (low cohesiveness): apply Eucatex Wall Base Preparer (Fundo Preparador de Paredes) according to label instructions and smooth the surface, applying 2 or 3 coats of Eucatex Acrylic Paste (Massa Acrílica) (areas that may receive moisture) or Eucatex Spackle (Massa Corrida) (areas that may not receive moisture).